KHANDELWAL STEEL AND PIPE DISTRIBUTORS

Javascript Photo Slider by WOWSlider.com v4.1

specification

Specification IS: (Part -1) 2004 -DIN 2439, DIN 2440, DIN 2441 ( Equivalent BS : 1387 : 1985 / EN 10255 : 2004 / EN 10240 : 1998 / DIN 2444 )
NB and Series		Outside Diameter		Wall Thikness		Nominal Weight
		Min	Max	Wall Thikness		Plain End
		MM	MM	MM	SWG	Kg/M	Meters /Tonne
15	L M H	21.0 21.0 21.0	21.4 21.8 21.8	2.0 2.6 3.2	14 12 10	0.95 1.21 1.44	1052 826 694
20	L M H	26.4 26.5 26.5	26.9 27.3 27.3	2.3 2.6 3.2	13 12 10	1.38 1.56 1.87	7125 641 535
25	L M H	33.2 33.3 33.3	33.8 34.2 34.2	2.6 3.2 4.0	12 10 8	1.98 2.41 2.93	505 415 341
32	L M H	41.9 42.0 42.0	42.5 42.9 42.9	2.6 3.2 4.0	12 10 8	2.54 3.10 3.79	394 322 264
40	L M H	47.8 47.8 47.9	48.4 48.8 48.8	2.9 3.2 4.0	11 10 8	3.23 3.56 4.37	310 281 229
50	L M H	59.6 59.7 59.7	60.2 60.8 60.8	2.9 3.6 4.5	11 9 7	4.08 5.03 6.19	245 199 161
65	L M H	75.2 75.3 75.3	76.0 76.6 76.6	3.2 3.6 4.5	10 9 7	5.74 6.42 7.93	175 156 126
80	L M H	87.9 88.0 88.0	88.7 89.5 89.5	3.2 4.0 4.8	10 8 6	6.72 8.36 9.90	149 120 101
100	L M H	113.0 113.1 113.1	113.9 115.0 115.0	3.6 4.5 5.4	9 7 5	9.75 12.20 14.50	102 82 69
125	M H	138.5 138.5	140.8 140.8	4.8 5.4	6 5	15.90 17.90	63 56
150	H	163.9 163.9	165.5 166.5	4.8 5.4	6 5	18.90 21.30	53 47

Thikness & Mass are applicable for Black & Galvanized Steel Tubes as per clause 8.1.1 of IS : 1239 (Part-1) 2004

Tolerance
A - Thikness	Tolerance	B- Weight	Tolerance	Length Tolerance
Light Tubes	+ not limited -8%	1 Single tubes ( Light Series ) 2. Single Tube ( Medium & Heavy Series ) 3. For quantities per load of 10 tonnes minimum ( Medium and Heavy Series )	+ 10% -8% +10% +7.5 % - 5 % +-7.5%	Unless otherwise Specified 4 to 7 mtrs. Can also be supplied in Fix Lengths +-5cm.
Medium & heavy Tubes	+ not limited -8%

ERW Steel Tubes for idlers for Belt Conveyors as per IS : 9295 -1983 Dimensions and Nominal Masses
Outside Diameter	Thikness	Mass	Meters
Outside Diameter	Thikness	Mass	Meters
MM	MM	Kg./Mtr.	Tonne
63.50	3.65	5.39	186
	4.05	5.94	168
	4.50	6.55	153
	4.85	7.01	143
	5.40	7.74	129
	6.30	8.89	112
76.10	3.65	6.52	153
	4.05	7.20	139
	4.50	7.95	126
	4.85	8.52	117
	5.40	9.42	106
	6.30	10.84	92
88.90	4.05	8.74	118
	4.50	9.37	107
	4.85	10.05	99
	5.40	11.12	90
	6.30	12.83	78
101.60	4.05	9.74	103
	4.50	10.78	93
	4.85	11.57	86
	5.40	12.81	78
	6.30	14.81	68
114.30	4.50	12.19	82
	4.85	13.09	76
	5.40	14.50	69
127.0	4.50	13.59	74
	4.85	14.61	68
	5.40	16.19	62
	6.30	18.75	53
139.70	4.50	15.00	67
	4.85	16.13	62
	5.40	17.89	56
	6.30	20.73	48
152.40	4.50	16.41	61
	4.85	17.65	57
	5.40	19.58	51
	6.30	22.70	44
159.00	4.50	17.15	58
	4.85	18.44	54
	5.40	20.46	49
	6.30	23.72	42
165.10	4.50	17.82	56
	4.85	19.17	52
	5.40	21.27	47
	6.30	24.67	41
168.30	4.50	18.18	55
	4.85	19.55	51
	5.40	21.69	46
	6.30	25.17	40
193.70	5.40	25.08	40
193.70	6.30	29.12	34
219.10	5.40	28.46	35
219.10	6.30	33.06	40

Outside Diameter +-0.8%
Ovality below 168.3mm : 0.5mm
Ovality including 168.3mm & above : 1.0mm
Weight Kg/Mtr : Single Tube : +-10%
For Truck Load of 10 Tonnes : +-7.5%
Thikness : +-10%
Grade : ERW Grade YST 210 & YST 240

Technical data of IS: 3601 1984 Tubes for Mechanical & General Engg. Purpose

Size N.B.		Approx O.D.(mm)	Thickness (mm)	Wt. Kg/ Mtr.	Meter Per Tonne	Size N.B		Approx O.D.(MM)	Thickness (MM)	Wt. Kg/ Mtr.	Meters/ Tonnes
MM	In	Approx O.D.(mm)	Thickness (mm)	Wt. Kg/ Mtr.	Meter Per Tonne	mm	Inch	Approx O.D.(MM)	Thickness (MM)	Wt. Kg/ Mtr.	Meters/ Tonnes
15	1/2"	21.3	1.8	0.866	1155	50	2"	60.3	2.3	3.29	304
			2	0.952	1050				2.6	3.7	270
			2.6	1.2	833				2.9	4.11	243
			3.2	1.43	699				3.2	4.51	222
			4	1.71	585
20	3/4"	26.9	1.8	1.11	901				3.6	5.03	199
			2	1.23	813				4	5.55	180
			2.3	1.4	714				4.5	6.19	162
			2.6	1.56	641				5	6.82	147
			3.2	1.87	535				5.6	7.55	133
			4	2.26	442				6.3	8.39	119
25	1"	33.7	2	1.56	641	65	2.5"	76.1	2.6	5.24	191
			2.3	1.78	562				3.2	5.75	174
			2.6	1.99	503				3.6	6.44	155
			3.2	2.41	415				4	7.11	141
			4	2.93	341				4.5	7.95	126
			4.5	3.24	309				5	8.777	114
32	1.25"	42.4	2.3	2.27	441	80	3"	88.9	5.4	9.42	106
			2.6	2.55	392				6.3	10.8	93
			3.2	3.09	324				7.1	12.1	83
			3.6	3.44	291				2.9	6.15	163
			4	3.79	264				3.2	6.76	148
			5	4.61	217				4	8.38	119
			5.4	4.93	203				5	10.3	97
40	1.5"	48.3	2.3	2.61					5.4	11.1	90
			2.6	2.93					5.6	11.5	87
			2.9	3.25					6.3	12.8	78
			3.2	3.56					8	16	63
			4	4.37
			4.9	5.23
			5	5.34
			5.6	5.9
			5.9	6.16

Steel Tubes for Structural Tubes Confirming to IS:1161:1998

N.B.	Series	Outside Diameter	Thickness	Nominal Weight		Calculated Nominal Weight
				Black Tube		Galvanized Tubes
				Plain End		Plain End
		MM	MM	Kg/ M	Meters/ Tonne	Kg/M	Meters/Tonne
15	L	21.3	2	0.947	1058	1	1003
	M		2.6	1.21	826	1.26	794
	H		3.2	1.44	694	1.49	671
20	L	26.9	2.3	1.38	725	1.43	699
	M		2.6	1.56	641	1.61	221
	H		3.2	1.87	535	1.92	521
25	L	33.7	2.6	1.98	505	2.03	493
	M		3.2	2.41	415	2.46	407
	H		4	2.93	341	2.98	336
32	L	42.4	2.6	1.54	394	2.62	382
	M		3.2	3.1	323	3.18	314
	H		4	3.79	264	3.87	258
40	L	48.3	2.9	3.23	310	3.34	299
	M		3.2	3.56	281	3.67	272
	H		4	4.37	229	4.48	223
50	L	60.3	2.9	4.08	245	4.2	238
	M		3.2	5.03	199	5.15	194
	H		4	6.19	162	6.31	158
65	L	76.1	3.2	5.71	175	5.86	171
	M		3.6	6.42	156	6.57	152
	H		4.5	7.93	126	8.1	123
80	L	88.9	3.2	6.72	149	6.9	145
	M		4	8.36	120	8.54	117
	H		4.8	9.9	101	10.08	99
90	L	101.6	3.6	8.7	115	8.97	111
	M		4	9.63	144	7.2	139
	H		4.8	11.5	87	11.77	85
100	L	114.3	3.6	9.75	103	9.97	100
	M		4.5	12.2	82	12.42	81
	H		5.4	14.5	69	14.72	68
110	L	127	4.5	13.6	74	13.9	72
	M		4.8	14.5	69	14.8	68
	H		5.4	16.2	62	14.8	61
125	L	139.7	4.5	15	67	15.25	66
	M		4.8	15.9	63	16.15	62
	H		5.4	17.9	56	18.15	55
135	L	152.4	4.5	16.4	61	16.78	60
	M		4.8	17.5	57	77.88	56
	H		5.4	19.6	51	19.98	55
150	L	165.1	4.5	17.8	56	18.2	55
	M		4.8	18.9	52	19.8	51
	H		5.4	21.3	47	21.7	46
150	L	168.3	4.5	18.2	55	18.66	54
	M		4.8	19.4	52	19.88	50
	H1		5.4	21.7	46	22.24	45
	H2		6.3	25.2	40	41	24
175	L	193.7	4.8	22.4	45	22.94	44
	M		5.4	25.1	40	25.64	39
	H		5.9	27.3	37	27.84	36
200	L	219.1	4.8	25.4	39	25.95	39
	M		5.6	29.5	34	30.05	33
	H		5.9	31	32	31.55	32
225	H	244.5	5.9	34.7	29	35.36	28
250	H	273	5.9	38.9	26	39.68	25
300	H	323.9	6.3	49.3	20	50.28	20
350	H	355.6	8	68.6	15	69.28	14

Tensile Properties
Grade	Y.S. Mpa (Kg/mm²)	T.S. Mpa (Kg/mm²)	% Elongation on
YST-210	210(21.42)	330(33.66)	20
YST-240	240(41.82)	410(41.82)	17
YST-310	310(31.62)	450(45.60)	14

Weight	Tolerances
Single Tube 1. Light Class 2. Medium & Heavy Class	+10%/-8% +/-10%

Tolerances

1. On outside diameter up to & including 48.3mm=+0.4mm/ -0.8mm
2. Over 48.3 mm=+/- 1%

Thikness	Tolerances
For All Size Welded Tubes	+ Not Limited -10%

10 Ton Lot	Tolerances
Light Class Medium & Heavy Class	+ /- 5% + /- 7.5%

ERW Steel Tubes for Water & Sewage Purpose Confirming to IS : 3589/2001
N.B. Size	Out Side Diameter	Wall Thickness	Weight (Plain End)
mm	mm	mm	Kg/m	M/Tonne
150	168.3	2.60	10.60	94
		3.20	13.00	77
		4.00	16.20	62
		4.50	18.20	55
		5.00	20.10	50
		6.30	25.20	40
175	193.7	2.60	12.30	81
		3.60	16.90	59
		4.50	21.00	48
		6.30	29.10	34
200	219.1	2.60	13.90	72
		3.60	19.10	52
		4.50	23.80	42
		6.30	33.10	30
250	273	3.60	23.90	42
		4.00	26.50	38
		5.00	33.90	30
		6.30	41.40	24
		7.10	46.57	21
		8.00	52.30	19
		10.00	64.90	15
300	323.9	4.00	31.60	32
		5.00	35.40	28
		5.60	44.00	23
		7.10	55.50	18
350	355.6	5.60	48.33	21
		6.40	55.11	18
		7.10	61.02	16
		7.90	67.74	15
		8.70	74.42	13
		9.50	81.08	12

Tolerance
a. Outside diameter of pipe	± 0.75%
b. Ovality	= Max. 1%
c. Thickness	± 10%
d. Length Unless other specified, length are in single random length of 4 to 7 meter.	-
e. Mass per Truck Load of 10 Monnes of above	± 7.5%

Physical Properties
Grade	T.S. Mpa MIN	Y.S. Mpa MIN	% Age Elongation of MIN
Fe 330	330	195	20
Fe 410	410	235	18

These are preferred OD & Thickness.Other sizes not included may be supplied as specified by purchaser.

ERW Steel Tubes For Water Wells Conforming To
IS : 4270 / 2001 Plain End Casing Pipes /Screwed and Socketed Casing Pipes

N.B. Size	Out Side Diameter	Wall Thickness	Nominal Weight		Socket OD	Socket Length (Min)
mm	mm	mm	kg/m	M/Tone	mm	mm
100	114.3	5	13.48	74	130	144.3
100	114.3	5.4	14.5	69	157	120.6
125	141.3	5	16.8	59
	141.3	5.4	18.1	55	184	127
		7.1	23.5	42.5
150	168.3	5.4	20.13	50	211.16	152.4
	168.3	5.4	21.6	46
		7.1	28.2	35.5	237	152.4
175	193.7	5.4	25.1	40
	193.7	6.4	29.6	34	291	177.8
		8	36.6	27
200	219.1	5.4	28.46	35	346	177.8
	219.1	6.4	33.6	30
		8	41.6	24
250	273.1	7.1	46.57	21
	273.1	8	52.3	19
		10	64.9	15
300	323.9	7.1	55.47	18
	323.9	8	62.3	16
		10	77.4	13
350	355.6	5.6	48.33	21
		6.4	55.11	18
		7.1	61.02	16
		7.9	67.74	15
		8.7	74.42	13
		9.5	81.08	12

Tolerance
a. Outside diameter of pipe	± 1.0%
b. Thickness Up to 406.4mm OD	(+) 15% (+)12.5%
c. Weight - Single Tube	(+)10% (+)8%
d. Length Unless otherwise specified	4 to 7 mtrs
There are prefered included OD & Thikness. Other sizes not include may be supplied as specified by purchaser

Physical Properties
Grade	Y.S. (Min) Mpa (N/mm²)	T.S.(Min) Mpa (N/mm²)	% Age Elongation on 5.65/So=GI.
Fe 330	235	410	15%

Technical Data Pipes Confoming to ASTM A-53* Gr. A & B Sch. 20/40/80

Nominal Bore		OutsideDiameter		Schedule	Wall Thickness		Weight Of Black Pipes Plain End			No. of pcs per Bundle
mm	inch	mm	inch		mm	inch	Kg/mtr	lbs/ft.	ft/ton
15	1/2	21.3	0.84	40	2.77	0.109	1.27	0.85	2592	120
				80	3.73	0.147	1.62	1.09	20230
20	3/4	26.7	1.05	40	2.87	0.113	1.69	1.13	1945	90
				80	3.91	0.154	2.2	1.48	1490
25	1	33.4	1.315	40	3.38	0.133	2.5	1.68	1311	60
				80	4.55	0.179	3.24	2.17	1016
32	1 1/4	42.2	1.66	40	3.56	0.14	3.39	2.27	967	42
				80	4.85	0.191	4.47	3	735
40	1 1/2	48.3	1.9	40	3.68	0.145	4.05	2.72	810	36
				80	5.08	0.2	5.41	3.63	607
50	2	60.3	2.375	40	3.91	0.154	5.44	3.66	603	26
				80	5.54	0.218	7.48	5.03	438
65	2 1/2	73	2.875	40	5.16	0.203	8.63	5.8	380	18
				80	7.01	0.276	11.41	7.67	287
80	3	88.9	3.5	40	5.49	0.216	11.29	7.58	291	14
				80	7.62	0.3	15.27	10.26	215
90	3 1/2	101.6	4	40	5.74	0.226	13.57	9.12	242	12
				80	8.08	0.318	18.63	12.52	176
100	4	114.3	4.5	40	6.02	0.237	16.07	10.8	204	10
				80	8.56	0.337	22.32	15	147
125	5	141.3	5.56	40	6.55	0.258	21.77	14.63	151	8
150	6	168.3	6.625	40	7.11	0.028	28.26	18.99	116	7
200	8	219.1	8.625	20	6.35	0.25	33.31	22.38	98	5
				30	7.04	0.277	36.31	24.72	89	3
				40	8.18	0.322	42.55	28.58	77	3
250	10	273	10.748	20	6.35	0.25	41.75	28.06	79	3
				30	7.8	0.307	51.01	34.27	64	3
				40	9.27	0.365	60.29	40.52	54	3
300	12	323.8	12.748	20	6.35	0.25	49.71	33.41	66	3
				30	8.38	0.33	65.18	43.1	50	3
				40	9.52	0.375	73.78	49.61	44	3
350	14	355.6	14	10	6.35	0.25	54.69	36.75	60	3
				20	7.92	0.312	67.9	45.65	48	3
				30	9.52	0.375	81.25	54.62	40	3

Tolerances
Outside Diameter	Pipe Size upto &including DN40 Pipe Size DN 50 or larger	+1-0.4mm +1-1% Thickness: -12.5(max) Weight: +10%

Mechenical Properties
	Grade A	Grade B
Yield Strength	205 Mpa(Min)	240Mpa(Min)
Tensile Strength	330 Mpa(Min)	415Mpa(Min)
Elongation%	As per ASTM A-%53, Table *4.1, 4.2

Chemical Properties				Composition , Max.%
	Carbon	Manganese	Phosphours	Sulphur	Copper	Nicket	ChormiumA	MolybdenumA	VanadiumA
Grade A	0.25	0.95	0.05	0.045	0.5	0.4	0.4	0.15	0.08
				80	3.73	0.147	1.62	1.09	20230
Grade B	0.3	1.2	0.05	0.045	0.5	0.4	0.4	0.15	0.08

Galvanizing
Minimum	0.490kg/ sq mtr
Average	0.550kg/ sq mtr

Technical Data Pipes Confoming to ASTM A-53* Gr. A & B Sch. 20/40/80

Nominal Bore		Outside Diameter		SCH 10				No. of Pices per Bundle	SCH 40/30*				No. of Pices per Bundle
				Wall Thickness		Weight Plain End		No. of Pices per Bundle	Wall Thickness		Weight Plain End		No. of Pices per Bundle
mm	inch	mm	inch	mm	inch	mm	inch		mm	inch	mm	inch
20	3/4	26.7	1.05	2.11	0.083	1.28	0.96	90	2.87	0.113	1.69	1.13	90
25	1	33.4	1.315	2.77	0.109	2.09	1.41	90	3.38	0.133	2.5	1.68	60
32	1 1/4	42.2	1.66	2.77	0.109	2.69	1.81	61	3.56	0.14	3.39	2.27	42
40	1 1/2	48.3	1.9	2.77	0.109	3.11	2.09	61	3.68	0.145	4.05	2.72	36
50	2	60.3	2.375	2.77	0.109	3.93	2.64	37	3.91	0.154	5.45	3.66	26
65	2 1/2	73	2.875	3.05	0.12	5.26	3.53	29	5.16	0.205	8.68	5.8	18
80	3	88.9	3.5	3.05	0.12	6.46	4.34	24	5.49	0.216	11.29	7.58	14
90	3 1/2	101.6	4	3.05	0.12	7.41	4.98	21	5.74	0.226	13.58	9.12	12
100	4	114.3	4.5	3.05	0.12	8.37	5.62	19	6.02	0.237	16.09	10.8	10
125	5	141.3	5.563	3.4	0.134	11.58	7.78	10	6.55	0.258	21.79	14.63	8
150	6	168.3	6.625	3.4	0.134	13.85	9.3	10	7.11	0.28	28.29	18.99	7
200	8	219.1	8.625	4.78	0.188	25.26	16.96	5	7.04*	0.277	36.82	24.72	5

ASTM A 135 GRADE A &B (BLACK AND GALVANIZED STEEL PIPES)

Nominal Bore		Outside Diameter		SCH 10				No. of Pices per Bundle
Nominal Bore		Outside Diameter		Wall Thickness		Weight Plain End
mm	inch	mm	inch	mm	inch	Kg/mtr	lbs/ft.
20	3/4	26.7	1.05	2.11	0.083	1.28	0.96	90
25	1	33.4	1.315	2.77	0.109	2.09	1.41	90
32	1 1/4	42.2	1.66	2.77	0.109	2.69	1.81	61
40	1 1/2	48.3	1.9	2.77	0.109	3.11	2.09	61
50	2	60.3	2.375	2.77	0.109	3.93	2.64	37
65	2 1/2	73	2.875	3.05	0.12	5.26	3.53	29
80	3	88.9	3.5	3.05	0.12	6.46	4.34	24
90	3 1/2	101.6	4	3.05	0.12	7.41	4.98	21
100	4	114.3	4.5	3.05	0.12	8.37	5.62	19
125	5	141.3	5.563	3.4	0.134	11.58	7.78	14

Khandelwal Steel & Pipe Distributors